| General
Purpose |
| DULON®
600 Grade I |
|
•
RMA Grade I rubber compound
•
Superior resistance to cutting, gouging and tearing from the
impact of large materials
•
High abrasion resistance and excellent low temperature flexibility
•
Recommended for service with all kinds of hard, sharp ores,
quartz, trap rock, riprap, granite, glass cullet, scrap metal,
ballast, etc.
|
| |
| DULON®
Grade II |
|
• RMA Grade II rubber compound
•
Durable and long-lasting in abrasive
applications
•
Resistant to cuts and gouges, flexible at lower temperatures
•
Recommended in rugged applications not requiring the superior
resistance of DULON® 600
•
Ideal for conveying sand and gravel, lime stone, crushed rock,
slag, coke, coal, cement rock, phosphate rock and most material
weighing between 50 and 120 Ibs. per cubic foot
|
|
| Cold
Weather |
| ARCTIC®
600 |
|
•
Specially compounded to retain flexibility in extremely low
temperatures—down to -60°F (-51°C)
•
Excellent cut and gouge resistance, superior abrasion resistance
|
|
| Fire
Resistant |
| FLAMEOUT®
SBR |
|
•
Tough, abrasion- and fire-resistant compound for underground
coal handling
•
Static conductivity is less than one megaohm of electrical
resistance*
Designated
safe in mining applications**
|
|
| Oil
Resistant |
| VOR®
|
|
•
Economical, static conductive, and moderately oil- and abrasion-resistant
•
Recommended for handling grain, wood chips and other lightweight
materials
|
| |
| ROR® |
|
•
Excellent oil resistance, withstands deterioration
•
Ideal for applications involving wood pitch and high terpene
southern pine chips, oily grains such as flaxseed, soybeans,
rice, milo, corn, cottonseed, or oil-treated materials
|
| |
| Nitrile |
| •
Oil resistance prevents sponginess and swelling caused by oily
materials such as petroleum-based oils, sludge, sewage and waste
materials |
*
According to Rubber Manufacturers ssociation Test 808.1
** Mine Safety and Health Administration designation 28-9
|
|
| Fire
and Oil Resistant |
| FAVOR® |
|
•
Fire-resistant, oil-resistant and abrasion-resistant
•
Static conductivity is less than one megaohm of electrical
resistance*
•
Oil resistance ideal for milo, corn, whole soy-beans, linseed,
cottonseed, and peanuts, and in conveying coal where some
oil resistance is required
•
Designated safe in mining applications*
|
| |
| FAVOR®
O.R.2 |
|
•
Fire-resistant and oil-resistant
•
Static conductivity is less than one megaohm of electrical
resistance*
•
Formulated for conveying grain products where dust suppression
systems are utilized
•
Designated safe in mining applications**
|
| |
| FLAMEOUT®
O.R.1 |
|
•
Resistance to the deteriorating effects of materials lightly
treated with oil
•
Flame-resistant and static-conductive
•
Designated safe in mining applications**
|
| |
| FLAMEOUT®
O.R.2 |
•
Increased resistance to the deteriorating
effects of materials such as coal treated lightly
with oil
• Flame-resistant and static-conductive
• Designated safe in mining applications** |
| |
| FLAMEOUT®
Neoprene |
•
Neoprene compounds for cover and carcass
• Oil-resistant, abrasion-resistant, flame-resistant and
static-conductive
• Designed for underground applications: mines,
power plants, electrical utilities, coal cleaning plants—wherever
material may be oily or oil-treated
• Designated safe in mining applications** |
|
| Heat
Resistant |
| HeatKing®
RA |
|
•
Economical and long lasting
•
For service handling rough, abrasive materials up to 300°F
(150°C): fertilizer, salt, cement, coke, slag, and steel
processing
|
| |
| Super
HeatKing® BT |
|
•
Top quality, heat-resistant compound for temperatures up to
450°F (232°C)
•
Ideal to withstand the baking and cracking action of hot fine
materials such as salt, ash, carbon black, foundry sand, coke,
cinders, castings, and slag
|
| |
| EPDM
Hot Service |
|
•
Designed for maximum resistance to the effects of hot abrasive
loads
•
Recommended for hot fines to 400°F (204°C) or loads
of coarse material to 450°F (232°C), such as clinker,
calcined lime, carbon black, and foundry sand
|
| |
| HeatKing®
OR |
|
•
A premium cover with heat and oil resistance
•
Good abrasion resistance to 350°F (177°C)
•
Recommended for hot asphalt paving mix, carbon pitch mixes,
and hot service conditions involving petroleum-based products
|
|
