Chemical Resistance Guidelines - Garlock Rubber Technologies


	Chemicals (Alphabetical)
		ACETALDEHYDE thru BENZOIC ACID

		BROMINE thru ETHYLENE DIBROMIDE

		ETHYLENE DICHLORIDE thru METHYL OLEATE

		MINERAL GREASES thru POTASSIUM ALUMINUM

		POTASSIUM SULFATE thru VARNISH

		VEGETABLE GREASES thru XYLENE



		SHEET RUBBER PRODUCTS

		PERFORMANCE CHARACTERISTICS


Resistance Ratings
	Good Resistance— The product is usually suitable for service.
	Fair Resistance— The chemical has some deteriorative effects, but the elastomer is still adequate for moderate service.
	Depends on Condition— Moderate service may be possible if chemical exposure is limited or infrequent. Functionality must be determined by testing.
	Not Recommended— The product is unsuitable for service.
**At temperatures up to 180°F (82°C) For resistance to chemicals other than those listed here, contact Garlock at (800) 643-0134.

WARNING:
Exposure to chemicals, fuels, oils or heat can affect the performance of sheet rubber and cause the product to lose its ability to maintain a seal, causing leakage or other failure which could result in property damage, serious injury or death. Since each application is unique, consult Customer Service at (800) 643-0134 or fax (800) 325-0506 for further information.